WAX FOR PROTECTIVE COTTO ANTI-WEAR FORNACE BERNASCONI

INDICATIONS

Microdispersion in water of hard waxes, resins and co-formulants with high chemical-physical resistance with a SEMI-OPAQUE effect (medium gloss)
This terracotta wax can be applied on all floors in terracotta, stone, marble (unpolished), recomposed and similar indoor or outdoor covered.
It is used as a finish after the WATER-REPELLENT ANTI-HUMIDITY ANTIMUFFA treatment, after the passage of the ANTI-STAIN and preceded by the application of the ‘AGGRAPPANTE LEVELLANTE.
Does not retain dirt and allows easy removal.
FORNACE BERNASCONI PROTECTIVE COTTO ANTI-WEAR FLOOR WAX contains polymers and waxes with a high bonding capacity to substrates; these active ingredients determine high anti-wear protection, excellent transparency, elasticity and reduced slipperiness. It represents a sacrificial and renewable finish. By virtue of its self-leveling characteristics and reduces the risk of non-uniform absorption.

If used in the prescribed quantities it gives slight toning without substantially altering the color and breathability of the material.

Delivery time: 3-5 working days.

METHOD OF USE

Shake well before use.
It is easily applied pure with a wax spreader / soft cloth / mop, spreading it evenly on the surface and removing any excess. The application of the PROTECTIVE FINISH can take place as soon as the coat of AGGRAPPANTE LIVELLANTE is dry.

If used as maintenance, it should be passed after washing with clean water, on a dry, pure floor or diluted up to 50% with water. As maintenance of the treated floors, apply the WEAR PROTECTIVE FINISH as needed (when the floor is particularly dry) or once a year.

INDICATIVE CONSUMPTION

8-10 m2 / 1 liter (for each coat)

PROCEDURE FOR TREATMENT OF AN INTERIOR TILED FLOOR </ p>

REQUEST INFORMATION